Rechargeable Replacement Light Kit for Illuminated Swings

Replacing the light inside an illuminated swing involves more than choosing a new LED strip. The strip, rechargeable battery, controller, charger and remote need to work together, and the components must fit the existing housing.

For a buyer in Kuwait, Vcan supplied lighting for installation inside an illuminated swing to replace the old light. The supplied arrangement was a complete rechargeable kit: LED strip lighting, a battery housed inside a 120 mm base, a charger and a remote control. The customer later placed a repeat order.

A complete kit rather than a loose LED strip

A strip-only purchase does not resolve questions about the existing battery, charging arrangement or remote. For this application, the lighting was supplied as a coordinated set:

• LED strip lighting for installation inside the swing.
• A 120 mm base with an internal rechargeable battery, forming the battery and control assembly.
• A charger supplied with the kit.
• A remote control supplied with the kit.

This is a strip-and-base arrangement, not simply a round lamp substituted for a strip. The base houses the battery while the strip allows the light source to extend along the required layout. For a replacement enquiry, both parts need to be considered together.

The 120 mm base size is not a specification for the swing's installation opening. Opening dimensions, mounting points and available depth must be checked separately.

Planning the strip layout inside the swing

Before selecting a replacement, establish where the original strip sits, how much lighting length is needed, and how the wiring reaches the base. A curved housing requires a different layout from a product illuminated by a single central light source.

Installation reference: the strip is held along the swing shell to illustrate its position relative to the housing. This is not a completed-installation photo or feedback from the Kuwait buyer. The final internal route and fixing method depend on the swing design.

Check the access opening as well as the lighting route. The battery base, cable connections and charging access should remain reachable for servicing. Do not assume that a strip with a similar appearance has the same electrical requirements or connector arrangement as the original.

The Kuwait purchase and repeat order

Vcan's order records show completed purchases by the same Kuwait buyer on October 9, 2021, and March 27, 2022, under the product description “LED light strip for swing.” Vcan's sales team confirmed that the application was rechargeable replacement lighting inside the swing and that the later purchase was a repeat order.

In a five-star review associated with the later order, the buyer praised Echo's helpful, prompt replies, the packaging and the condition of the shipment on arrival.

The feedback describes purchasing support and delivery condition. It does not provide a measured runtime, waterproof rating or service-life result, and the reason for the repeat purchase was not recorded.

Product packaging reference

Same-type product reference from another customer's order. This photo shows strip packaging, not the Kuwait customer's shipment or the complete kit contents. The label describes the pictured configuration; it should not be used to identify the specifications of the Kuwait orders.

Strip length, operating voltage, connectors and the required protection level need to be confirmed for each application. An enclosed swing body alone does not establish that the lighting assembly is suitable for outdoor exposure.

What to check before ordering a replacement kit

Send the following details so that the replacement can be assessed as a complete system:

1. The existing installation: photos of the swing, its access opening, the old strip and the base.
2. Mechanical fit: base diameter, opening dimensions, mounting-hole spacing and internal clearance.
3. Lighting layout: required strip length, position and any branches or separate illuminated sections.
4. Electrical information: readable labels on the original battery, controller and charger, plus connector photos.
5. Charging and control: where charging can be accessed and whether you need a new complete set or want to retain existing components.
6. Use conditions: indoor or outdoor use, expected moisture exposure and desired operating time between charges.

An existing charger or remote should not be reused solely because it looks similar. Confirm compatibility first. For several swings, test the selected kit in one actual housing before proceeding with the remaining units.

Need lighting for an existing illuminated swing?

Vcan supplies LED strip lighting components and rechargeable LED modules for integration into illuminated products. The appropriate arrangement depends on the internal layout, power requirements and mounting space—not the furniture name alone.

Send Vcan your swing and existing-light photos, together with the measurements, required quantity and destination country, to discuss a suitable replacement kit.