Large illuminated furniture · customer case
Dual & Triple LED Modules for Large Illuminated Bars
How one customer moved from single VC-LN120 modules to linked light units and larger batteries for a large bar.
This customer needed sufficient illumination inside a large bar and longer working time. Linked dual and triple rechargeable LED light units addressed the lighting layout; a 5,200mAh battery in each unit addressed the operating-time requirement. Samples were tested and approved before regular small-batch repeat orders.
From a single 120mm module to a larger furniture layout
The customer had already purchased VC-LN120 120mm rechargeable LED modules. For a large bar, the next requirement was enough light inside a much larger piece of furniture. The buyer asked for two connected units, and also a three-unit version, so the light sources could be installed together inside the furniture.
This is a useful distinction when choosing an LED light engine for large illuminated furniture: battery capacity concerns operating time, while the number and position of light sources concern illumination. A bigger battery alone does not solve an unsuitable light layout.
Dual or triple rechargeable LED lighting kits
The VC-DU120 dual LED kit and VC-TR120 triple LED system provide two and three linked light units respectively. This gives a furniture project more than one light position to evaluate. The customer selected these arrangements to obtain the brightness needed inside the large bar.
The case does not establish a universal furniture size limit or a measured twofold or threefold increase in brightness. Shell dimensions, internal partitions, material and light-source positions all affect the result. Review the appearance through the finished shell before approving the layout.
4400mAh standard, 5200mAh per unit for this customer
The standard battery capacity for each light unit in this 120mm family is 4,400mAh. For this customer's longer-runtime requirement, Vcan recommended 5,200mAh in each individual unit. A dual kit therefore has two separate 5,200mAh batteries; it does not divide one 5,200mAh battery between two lights.
| Arrangement | Standard battery configuration | This customer's configuration |
|---|---|---|
| Single VC-LN120 | 1 × 4,400mAh | 1 × 5,200mAh |
| Dual VC-DU120 | 2 × 4,400mAh | 2 × 5,200mAh |
| Triple VC-TR120 | 3 × 4,400mAh | 3 × 5,200mAh |
These figures describe the battery allocation per light unit. Confirm the supplied connections, controls and charging arrangement for your selected kit rather than assuming that the units share a battery or charging port.
Customer feedback: more than 10 hours at maximum white brightness
The customer reported that an individual unit with the selected 5,200mAh battery worked for more than 10 hours on white light at maximum brightness. Other colours lasted longer, according to the same feedback.
This is a customer-reported result for that configuration, rather than a laboratory measurement or a guaranteed figure for every standard module. Linked units should not be described as providing 20 or 30 hours simply because there are two or three of them. Check battery capacity, brightness and runtime using the settings required for your own product.
Sample testing led to regular small-batch repeat orders
The buyer purchased samples, tested them and was happy with the result. The relationship continued with regular repeat orders, typically a few dozen sets at a time, as well as purchases of other Vcan models.
The value of this project lies in matching the configuration to a real piece of furniture and confirming it through samples. The repeat-order quantities describe this customer's purchasing pattern; they are not a published minimum order quantity for every custom project. Use a rechargeable LED module sample checklist to record the configuration and acceptance conditions before reordering.
What to confirm for your illuminated bar
For a similar project, share the furniture dimensions, internal photos and intended positions for two or three light units. Include the installation openings, available depth and cable routes so the proposed assembly can be reviewed against the actual housing.
Agree the required white-light or colour mode, brightness, operating hours and charging routine. Then test the complete sample assembly inside the furniture. Record the approved battery capacity and kit configuration so repeat orders follow the same specification.
For an OEM rechargeable LED module project, send your housing details and operating-time target through Vcan's project enquiry form. We can review whether a single, dual or triple arrangement is appropriate and confirm a sample configuration.
Questions about linked LED modules
Why use two or three LED light units inside a large bar?
A large illuminated furniture shell may need light at more than one position. This customer requested linked dual and triple units for sufficient illumination inside a large bar. The final layout should be tested in the actual housing.
Does a dual kit share one 5200mAh battery?
No. In this customer's configuration, each light unit has its own 5200mAh battery. The dual kit uses two 5200mAh batteries and the triple kit uses three.
Is 5200mAh the standard battery capacity?
The standard capacity for each light unit in this 120mm family is 4400mAh. This customer selected 5200mAh per unit for longer operating time. Confirm the selected configuration when requesting samples or a quotation.
Do linked modules run for twice or three times as long?
Adding light units does not establish a twofold or threefold runtime. The customer reported more than 10 hours of maximum-brightness white light from an individual 5200mAh unit, with other colours lasting longer. This is customer feedback for that configuration, not a guaranteed runtime for every kit or operating condition.
