Verified illuminated-sofa order case
Replacement LED Light for an Illuminated Sofa: A 10-Unit Repeat Order
A U.S. buyer installed VC-LI120 lights inside illuminated sofas, completed one 10-unit order and later placed another for 10 more.
When the light inside a moulded PE sofa needs replacement, buyers rarely search by a supplier's model number first. They look for a replacement LED light for the sofa they already own. The useful starting point is the original opening and charging system—not the appearance of the furniture alone.
The same buyer completed two orders for lights used inside illuminated sofas: 10 units in May 2023 and another 10 units in August 2023. The confirmed module was VC-LI120.
Order evidence
Two completed orders, each for 10 replacement lights.
The surviving Alibaba order export records the first completed order on May 22, 2023 and the second on August 1, 2023. Both list 10 lights. Vcan's sales records confirm that the lights were installed inside illuminated sofas and identify the supplied model as VC-LI120.
| Buyer | U.S. production company (identity withheld) |
|---|---|
| Application | LED light installed inside an illuminated sofa |
| First order | 10 replacement lights ordered on May 22, 2023 |
| Follow-up order | 10 more ordered on August 1, 2023 |
| Verified total | 20 lights across two completed orders |
| Confirmed model | VC-LI120 |
| Customer review | No review or use photo was provided |
There is no customer review, installation photo or written performance report for these orders. The article therefore uses only the confirmed application, model, dates, quantities and completed-order status. It does not invent a reason for the follow-up purchase.
The application
The light is mounted inside the hollow sofa body.
An illuminated sofa is typically made with a translucent moulded PE shell. The LED light sits inside the hollow body so its output spreads through the plastic instead of shining directly at the user. This keeps the light source protected and gives the sofa an even coloured glow.
The furniture shape does not determine compatibility by itself. Two sofas that look similar can use different cut-outs, flange diameters, bolt patterns, installation depths and charging systems. Those details must be checked before a replacement is ordered.
Confirmed module
A sealed 120 mm induction-charge light was used.
The supplied model was VC-LI120, a 120 mm rechargeable light module designed around induction charging. The sealed charging arrangement avoids opening a charging-port cover each time the battery is charged, which is useful when the light is installed inside furniture and access is limited.
VC-LI120 is the internal product reference, not the main phrase a sofa owner is expected to search. For replacement work, the important description is a rechargeable replacement LED light for an illuminated sofa; the model is used only after the fit and charging method have been confirmed.
Replacement checklist
Confirm the opening and charger before choosing a model.
A replacement light should be matched as a mechanical and electrical system. The fastest way to avoid ordering the wrong part is to remove one original unit, photograph it from both sides and measure the furniture opening and mounting points.
- Measure the outer flange and the actual cut-out diameter.
- Record the number of mounting holes and centre-to-centre spacing.
- Check the depth available inside the sofa body.
- Identify direct charging or induction charging from the original set.
- Photograph the charger label and any remote control supplied with the sofa.
- Confirm indoor, outdoor or poolside exposure and the required sealing level.
- Test one complete sample before replacing a larger group of lights.
It verifies an initial 10-unit purchase and a later purchase of 10 more by the same buyer. Without written feedback, it does not prove runtime, brightness, service life or the buyer's reason for ordering again.
Need a replacement light for an illuminated sofa?
Send photos of the old light and sofa opening, the flange and cut-out measurements, mounting-hole spacing, charging method, quantity and destination country. We can compare those details with the VC-LI120 module, the wider rechargeable LED module range and our replacement checklist.
Questions
Replacing the LED light inside an illuminated sofa.
What replacement LED light can be used inside an illuminated sofa?
The replacement must match the sofa's opening, mounting-hole pattern, installation depth, charging system and required sealing. This buyer used the 120 mm VC-LI120 induction-charge module, but the model name alone is not enough to prove compatibility with another sofa.
Can I replace a direct-charge sofa light with an induction-charge light?
Sometimes, but it is not a drop-in assumption. The receiving opening, flange, depth, charger arrangement and access for installation must all be checked. Send photos and measurements of the original light before selecting a replacement.
Does this repeat order prove the buyer was satisfied?
It proves that the same buyer completed a second order for the same quantity and product listing. Because no review or written feedback was provided, this case does not claim a reason for the repeat purchase or quote the buyer's opinion.
What information is needed to match a replacement light for an LED sofa?
Provide photos of the old light and sofa opening, flange diameter, cut-out diameter, bolt-hole spacing, available depth, charging method, charger label, control type, quantity and destination country.
Customer identity, order numbers, prices and contact details are withheld. Order dates, quantities, status, application and model are based on Vcan's order and sales records. No customer review or feedback photo is presented. Furniture and module images are Vcan application and product-family references, not images from these orders.
