Customer case · United Arab Emirates
When an Acrylic Bar Counter Is Bright in the Middle but Dim at the Sides
A UAE customer tested 120 mm LED modules in an acrylic bar counter. The centre looked bright, but both sides stayed dim. After trying a linked pair, the customer ordered 55 sets.

If an acrylic bar counter is bright in the middle but dim at both sides, start by checking where the light sits. A 120 mm LED module in the centre can make the nearest area look bright while leaving the ends underlit. In this UAE project, testing two linked LED modules at separate positions gave the customer the look they wanted.
What the first two sample sets revealed
The customer asked Vcan how to light an acrylic bar counter from the inside. We recommended a 120 mm LED module and the customer ordered two sample sets. After testing, they told us the light was too dim. We first asked about the brightness setting. The customer knew how to select maximum brightness and had already checked it.
The customer reported dimensions of 50 × 70 × 106 cm. What clarified the problem was their description of the lit panels. With a light at the centre, the middle looked bright and both sides were dim. Those two observations told us where to focus the next sample test.

Why the customer tried a linked pair
We recommended a dual-linked configuration so that the two light units could sit apart inside the counter. This gave the customer a way to bring each light source closer to a dimmer area. The best positions depend on the space behind the panels, how the acrylic transmits light and whether the frame or internal supports block part of the light.
| Project stage | What the customer tested or ordered |
|---|---|
| First sample order | Two sample sets of the 120 mm LED module |
| Initial setup | One light position at the centre, with a bright middle and dim sides |
| Next configuration | Two linked LED modules for separate light positions |
| Order confirmed in August 2022 | 30 US-spec sets and 25 EU-spec sets, 55 sets in total |
After receiving the linked pair, the customer said it gave them the effect they wanted. The result comes from the customer’s visual assessment of their counter.
How to test LED lights inside your bar counter
Identify where the panels are dim
Switch to the colour and brightness you plan to use. Look at the front and ends from where guests will stand. A bright centre with dark edges points to light placement. A counter that looks dim across the entire front calls for a check of both the light output and how much light the panels pass through.
Compare two positions before choosing mounting points
Within the available space, try moving the light towards a dim area and see which part of the panel responds. If one position lights one region well while leaving another region dim, trial two positions. Keep the colour and brightness setting consistent between trials so you can judge the change in coverage. Check that you can still reach the modules and route the connecting cable before settling on the mounting positions.
Start with the dimensions and one photo
Send the overall dimensions or a simple sketch and a photo showing the counter lit. If you know where the current light sits, mark that position. Vcan can use those details to discuss where to try one or two lights before you order samples. The LED bar counter application page shows how internal lights are used in this type of furniture.
Common questions about lighting an acrylic bar counter
Will a brighter module fix dim ends?
Extra output can help when the whole panel is dim. When the centre is already bright, try spreading the light across the housing. The LED module brightness guide explains how to assess light output in the finished shell.
Will every acrylic counter need two LED modules?
The number depends on the shape, panel material, mounting positions and desired effect. Use a sample in the actual housing to decide. For a larger project where you also need to compare two or three light positions and runtime, see the linked LED modules for large illuminated bars guide.
Discuss a sample for your acrylic bar counter
Tell us which part of the counter should glow and share its approximate size. If you have already tried a light, tell us where it was placed and which panels stayed dim. We can discuss a sample configuration around the housing you are building.
